BIODUR Automotive Acrylic Primer Spray Paint – Grey – 500ml – Quick Dry – Anti-rust – High Adhesion Base Coat – Auto Body, Plastic & Metal

BIODUR Automotive Acrylic Primer Spray Paint – Grey (500ml)

Prepare your automotive and metal surfaces for a flawless, long-lasting finish with BIODUR Automotive Acrylic Primer. Formulated with a high-grade acrylic resin base, this professional-quality spray primer delivers dependable anti-rust protection and superior adhesion for topcoat paints. Its high-filling formula smoothly levels out minor scratches and surface imperfections, while its high dry residue content significantly reduces the amount of topcoat paint needed for full coverage.

Key Features & Benefits

• High Filling Capacity: Fills scratches, swirl marks, and minor dents from previous prep work to create a perfectly smooth surface.
• Quick-Drying & Sandable: Dry to the touch in 10 to 15 minutes and ready for sanding just 30 minutes after application.
• Corrosion Protection: Provides dependable anti-rust protection for bare metal, making it suitable for interior and exterior use.
• Maximum Adhesion: Promotes strong bonding between the surface and topcoat to prevent peeling or flaking.
• Smooth Matt Finish: Dries to a uniform low-gloss matt finish (5–15 gloss units) for optimal paint coverage.

Suitable Applications

Ideal for paint preparation and restoration on a wide variety of vehicles and equipment:

• Vehicles: Cars, trucks, car bodywork, and auto body panels.
• Powersports & Two-Wheelers: Motorcycles, motor scooters, bicycles, and snowmobiles.
• Marine & Machinery: Small boats, speedboats, water scooters, and agricultural machinery.

Technical Specifications

• Volume: 500 ml aerosol can
• Binding Base: High-grade acrylic resin
• Color & Gloss: Grey / Matt (5–15 gloss units according to DIN 67530)
• Coverage: 2.5–3.0 m² per 500 ml can
• Dry to Touch: 10–15 minutes (at 25°C, 50% relative air humidity)
• Sandable: 30 minutes after application
• Fully Cured: Approximately 24 hours
• Storage: Up to 5 years (stored at 10°–25°C, max 60% relative humidity)

Directions for Use

1. Surface Preparation: Ensure the surface is clean, dry, and free from grease, oil, and loose rust. Lightly sand existing paint layers.
2. Application: Shake the aerosol can thoroughly before use. Apply thin, even coats from a steady distance.
3. Sanding & Topcoat: Allow the primer to dry for 30 minutes before sanding. Once smooth, apply your chosen topcoat.
4. Safety: Carefully read and follow all safety instructions and warnings on the product label before use.